FMEA | What is FMEA (Failure Mode and Effects Analysis)?

FMEA | What is FMEA (Failure Mode and Effects Analysis)?

What is FMEA (Failure Mode and Effects Analysis)?

→ "FMEA (Failure Mode and Effects Analysis)  is an Analytical Technique that combines the technology and Experience of People in identifying predictable failure modes of a Product or Process and planning for its elimination."
Join Industrial Knowledge WhatsApp Group for Daily Updates

➥ FMEA can be explained as a group of activities intended to:

  1. Recognize and evaluate the potential failure of a product or process and its effects.
  2. Identify actions that could eliminate or reduce the chance of potential failures.
  3. Document the Process.

→ Failure mode and effects analysis is a rigorous step-by-step process, to identifying all possible failures in a design, manufacturing, assembly process, product or service.



➥ FMEA drives systematic thinking about a product or process by asking and attempting to answer three basic questions:

  1. What could go wrong (failure) with a system or process?
  2. How bad can it get (risks), if something goes wrong (fails)?
  3. What can be done (corrective action) to prevent things from going wrong (failures)?

➥ FMEA attempts to identify and prioritize potential process or system failures and the failure is rated on three criteria:

  1.  The impact of a failure – Severity
  2.  The frequency of the causes of the failure – Occurrence
  3.  How easy is it to detect the cause of failure - Detection
→ It is an Analytical Technique that combines the technology and Experience of People in identifying predictable failure modes of a Product or Process and planning for its elimination.
→ It was made from two different words as mentioned below:
→ “Failure modes” means the ways, or modes, in which something might fail.
→ Failures are any errors or defects, especially ones that affect the customer and can be potential or actual.
→ “Effects analysis” refers to studying the consequences of those failures.

AIAG VDA FMEA Training Presentation




History of FMEA (Failure Mode and Effects Analysis):

→ Procedures for conducting FMEA were described in US Armed Forces Military procedures document MIL-P-1629 in (1949).
History of FMEA (Failure Mode and Effects Analysis)

→ By the early 1960s, contractors for the U.S National Aeronautics and Space Administration (NASA) were using variations of FMEA under a variety of names. 
→ NASA programs using Failure Mode and Effects Analysis variants included Apollo, Viking, Voyager, Magellan, Galileo, and Skylab.
History of FMEA (Failure Mode and Effects Analysis)

→ The civil aviation industry was an early adopter of Failure Mode and Effects Analysis, with the Society for Automotive Engineers (SAE) publishing ARP926 in 1967.
History of FMEA (Failure Mode and Effects Analysis)

→ During the 1970s, the use of FMEA and related techniques spread to other industries.
→ In 1971 NASA prepared a report for the U.S Geological Survey recommending the use of Failure Mode and Effects Analysis in the assessment of offshore petroleum exploration.
→ The automotive industry began to use it by the mid-1970s.
 The Ford Motor Company introduced Failure Mode and Effects Analysis to the automotive industry for safety and regulatory consideration.
History of FMEA (Failure Mode and Effects Analysis)

 In 1993, the Automotive Industry Action Group (AIAG) first published a Failure Mode and Effects Analysis standard for the automotive industry. 
History of FMEA (Failure Mode and Effects Analysis)

→ Failure Mode and Effects Analysis manual is now latest available in its fourth edition.


FMEA 4th Edition

→ The SAE first published related standard J1739 in 1994.
 This standard is also now in its fourth edition.

    Changes in FMEA Manual in 4th Edition:

     An improved format, easier to read.
     Better examples to improve utility.
     Reinforces need for management support.
     Strengthens linkage between DFMEA / PFMEA.
     Ranking tables better reflect real-world use.
     Introduces alternative methods in use.
     Suggests better means than RPN to assess risk.
     Recommends threshold RPN values to initiate the required action.


    When to do Failure Mode and Effects Analysis?

    → It is a live document.
    → Throughout the product development cycle, the FMEA is changed and updated as appropriate when the product and process changed.
    → These changes can introduce new failure modes.
    → We can begin as soon as a project is selected for a certain Process, System or Design.


    ➤ Review and/or updating of the FMEA:

    → FMEA Should be revised as improvement or changes made to a process.
    → A new product, process or service is being initiated (at the beginning of the cycle).
    → When an existing process, product or service is being applied in a new way.
    → Before developing control plans for a new or modified process.
    → When improvement goals are planned for an existing process, product or service.
    → Changes are made to the operating conditions the product, process or service.
    → When analyzing failures of an existing process, product or service.
    → When the product design is changed the process is impacted and vice-versa.

    → Periodically throughout the life of the process, product or service
    → New regulations are instituted.
    → Customer feedback indicates problems in the product or process.

    ➤ Who does an FMEA (Failure Mode and Effects Analysis)?

    → This is a Team Process.
    → Team sizes may vary, but the recommended size is approximately 5 to 7 members.
    → Depending upon the type of FMEA being done, members may come from:
        ● Research and Development 
        ● Manufacturing
        ● Testing & Validation
        ● Human Resources
        ● Maintenance
        ● Supplier
        ● Quality Department
        ● Marketing & Sales etc...


    ➤ Four Common Classes of FMEA:


        ● System FMEA – Focuses on how interactions among systems might fail.
        ● Design FMEA – Focuses on how product design might fail. 
        ● Process FMEA – Focuses on how processes that make the product might fail. 
        ● Equipment FMEA – Focuses on how machinery that performs processes might fail

    Benefits of FMEA (Failure Mode and Effects Analysis):

    → Improve product or process quality, reliability, and cost-effectiveness.
    → It Increases customer satisfaction
    → Decrease inhouse defects and line stoppage issues
    → Early identification and elimination of potential failure modes related to product or process
    → It helps to prioritize product or process deficiencies
    → FMEA improves engineering and organizational knowledge
    → It emphasizes problem prevention rather than detection
    → It is an important tool for risk assessment and actions taken for reducing the risk
    → FMEA is a catalyst for teamwork and idea exchange between functions

    22 Comments

    1. It's a very helpful to understand
      So thanks sir

      ReplyDelete
    2. Thanks for sharing important documents

      ReplyDelete
    3. It's very good , Thank you so much for sharing

      ReplyDelete
    4. it is very good topic,thank you so mach for sharing

      ReplyDelete
    5. It is a very good tool for quality professional, thanks for sharing

      ReplyDelete
    6. Very much informative

      ReplyDelete
    7. Excellent guidance and could understand easily. Awesome. Greatful and Thankful to you team.

      ReplyDelete
    8. Hi please details input about FMEA implementations. Tq

      ReplyDelete
    9. Thankyou so much sir
      Given good knowledge

      ReplyDelete
    10. Thank you for sharing! - I had never heard of FMEA before, and now, thanks to your explanations, it makes so much sense!!

      ReplyDelete
      Replies
      1. Thanks for you kind words and happy to hear from you. happy learning

        Delete

    Post a Comment

    Previous Post Next Post